For DA/SA action, there are two P226/P228/P229 trigger bars, the “Super Finish” trigger bar, part number: 1200332-R. They are stamped “473”. These trigger bars will only fit in DAK (double action Kellerman) capable frames.
Most Sig frames require the regular trigger bar, part number: ”Trigger Bar-2” which is often stamped with “801”. The most notable difference, other than the 473 super finish being is very shiny, is the 801 trigger bar is split at the rear (right) and the 473 has no split.
I find that the 473 trigger bar is harder to install, getting it past the safety lever is difficult, so I install the trigger bar before I install the sear and safety lever.
Now the Revenant Arms frames are compatible with both trigger bars.
Randall
Does the Revenant Arms Sig Sauer P Series Trigger Bar work in the older and unmodified frames? The picture shows 180 stamped on the trigger bar (instead of the 801 or 473) and does not feature the split tail. I thought that the 180 was DAK?
David Anthony
Thank you for pointing that out. The picture is incorrect. The Revenant Arms trigger bar is compatible with the 801 trigger bar and will fit in all frames.
Tom Skotzke
Hello Matrix, is the super finish trigger bar available for a P227 Elite ? The trigger bar in mine is stamped with the numbers 844. Thanks
TAS
David
Hello,
Very sorry to say that we don’t have that one.